h视频在线看-h视频在线免费观看-h视屏在线网站-h网站国产-h网站免费视频网站-h网站在线播放-h网站在线观看-h网址在线观看-h小视频-h页国产-h在线播放-h在线观

Uninterrupted tube colloid mill, new viscose mill, pipeline grinding pump, viscose fiber crushing pump, adhesive grinding pump, high efficiency application of pipeline colloid mill grinding pump for homogeneous grinding of fish slurry slurry, CN .HAOSTAR new colloid mill-pipeline colloid mill, fish pulp slurry grinding pump for fine grinding of fish pulp slurry online materials, one-step grinding, high efficiency and energy saving, compared with similar products, it can save electricity about 60,000KW in one year The fish syrup uses natural deep-sea fish as raw material and is processed by advanced biotechnology; the fish syrup production equipment is refined by high-temperature cooking, enzymatic hydrolysis, crushing, grinding, homogenization, juice pressing, centrifugation, vacuum concentration and other processes. It contains all the nutrients of fish and is an excellent attractant and nutritional supplement in aquatic products and livestock feed.

Fish pulp protein powder enzymatic hydrolysis fish meal processing equipment basic introduction Fish pulp protein powder (for feed) Fish pulp protein powder (also known as fish pulp protein peptide powder, biochemical fish meal) is based on anchovy deep sea cod steak as the main raw material, It is a powdery product obtained by cooking, grinding by Hao Xing grinding pump (multi-function grinding machine), pressing juice, concentration, and low temperature spray drying. Its main components are free proteins, low molecular peptides, nucleic acids, water-soluble vitamins and trace elements, so it has a strong attractant and nutritional health function. The production process includes: cleaning, enzymolysis, filtration, filling, concentration, spray drying and other important production links. Fish pulp protein powder enzymatic hydrolysis fish meal processing equipment performance characteristics cooking: high temperature and high pressure tank cooking and crushing raw materials, steam heating Jacketed high-pressure tank. 2. Enzymatic hydrolysis: after cooking, the slurry is filtered and then put into the enzymatic hydrolysis reaction tank for thermal insulation and enzymatic hydrolysis. The equipment and supporting facilities used include double-layer insulation and pressure-resistant enzymolysis tank, operation platform and fuel oil steam boiler. (Note: The materials of the production equipment that are in direct contact with the materials are all above 304 stainless steel, and sanitary hoses and stainless steel pipes are used in the material transportation process.) Fish soluble protein powder enzyme hydrolysis fish meal processing equipment technical parameters 3. Filtration: This process Use the vertical diatomite filter to finely filter the enzymolysis solution to meet the requirements of the next process. The equipment and supporting facilities used are two sets of single-layer pressure storage tanks, vertical diatomite filters, and 100,000-level air-conditioning purification equipment (public) in the workshop. 4. Filling: If the product needs to be in liquid form, the filtered liquid can be directly packed into standard small barrels. After passing the inspection, store it in the warehouse. A single-layer pressure-resistant liquid storage tank and a packaging barrel drying sterilization room are required. Instructions for use of fish meal protein powder enzymatic hydrolysis fish meal processing equipment 5. Concentration, spray drying: The filtered liquid needs to be concentrated to a certain concentration before entering the spray tower before it can be spray dried, which is of great significance for improving economic benefits and production efficiency. Big. The equipment and supporting facilities used in this process include a single-layer pressure-resistant liquid storage tank, a single-effect falling film concentration, and a centrifugal spray drying tower. Procurement Instructions for Fish Meal Protein Powder Enzymatic Hydrolysis Fish Meal Processing Equipment

Fish syrup is the squeezed wastewater generated during the production of fish meal. Every ton of fish meal produced will produce two to three times the amount of fish syrup. In the previous fishmeal production process, fish paste was usually discharged directly into the environment, which not only wasted this protein-rich resource, but also caused serious environmental pollution. In recent years, industry researchers have done more research on how to use fish paste, such as the production of food grade umami (CN107136465A) using fish paste, the obtained umami is easy to absorb, the umami is sufficient, or the fish paste is used Preparation of protein fertilizer (CN105060944A) not only provides nutrients for crops and increases production, but also improves soil conditions and promotes healthy growth of crops. Because fish pulp is derived from marine fish, it has a fishy peculiar smell. After the hydrolysis process, other flavor substances are produced, which is a high-quality feed additive.

Hydrolysis method A production method of grinding pump to grind the hydrolyzed fish slurry, specifically including the following steps:

Inject 200 parts of fish paste into the heating cooking device, cook at 85°C for 40 min at high temperature for sterilization and killing enzymes, and after cooling, add Lactobacillus plantarum, Lactococcus lactis and Lactobacillus brevis complex, inoculation amount 5%, in 30 Fermentation at ℃ for 3 days, after the fermentation is completed, adjust the pH to 10.0 with an appropriate amount of 3mol/L sodium hydroxide solution, stir evenly, add 1.5wt% alkaline protease, and continue to stir at 75℃ for enzymolysis for 2 hours Afterwards, the vacuum distillation is performed again to remove excess water, and the enzyme killing effect is achieved while concentrating. When the water content is reduced to 45%, the heating is stopped, and then an AC electric field with a strength of 60V/cm is applied for 6 minutes. After cooling, it can be filled. Hydrolyzed fish paste products.

(1) Blending: Add appropriate amount of water to the fish lye stock solution to make a fish lye with 80% water content.

(2) Sterilization: Increase the temperature to 90 degrees and sterilize using infrared rays.

(3) Separation of crude fat: The resulting fish slurry is sent to a horizontal centrifuge and a butterfly centrifuge successively to separate the crude fat in it until the residual amount is less than 1%.

(4) Removal of salt: The resulting fish paste is passed through a resin separation device to remove the salt in the fish paste until its content is less than 0.04%.

(5) Enzymatic hydrolysis: Add 1% PROTEXP enzyme to carry out enzymatic hydrolysis at 45 degrees water temperature for 4 hours to make the fish lysate into small molecules.

(6) Homogeneous grinding and emulsification: maltodextrin and denatured starch are mixed in a certain proportion and added to the fish syrup, after Haoxing colloid mill-pipeline grinding pump-multi-function grinding machine (using unit: Ocean God Group, Rongcheng Haisheng Feed Co., Ltd., Guangzhou Genda Agricultural Technology Development Co., Ltd., Ningbo Haizhongyuan Biological Technology Co., Ltd., Rongcheng Hefeng Biotechnology Co., Ltd. and other water-soluble slurry feed and water-soluble fertilizer production plants) grinding pumps are similar or identical to those at home and abroad Compared with the model specifications, the colloid mill saves electricity by 50-60%, the grinding disc (rotor and stator) grinding loss is also low, energy saving and high efficiency. Afterwards, it enters the high-pressure homogenizer for homogenization and emulsification.

(7) Concentration: The resulting fish solution slurry is sent to a vacuum low-temperature concentration tank, the temperature is controlled at 60 degrees, the vacuum degree is -0.095, and a fish solution slurry with a water content of 40% is obtained in 4 hours.

(8) Drying: enter the centrifugal spray dryer for drying, to obtain light yellow powder with water content not higher than 5% and total nitrogen higher than 13%.

2. Preparation of protein fertilizer

(1) Sterilization treatment of fish solution slurry: Chlorine gas was introduced into the fish solution slurry to maintain the chlorine content in the fish solution slurry at a concentration of 1 mg/L, and sterilization treatment was carried out for 10 minutes.

(2) Deodorization treatment of fish dissolving paste: heat the fish dissolving paste after sterilization treatment at 60°C for 30 minutes, add diatomite added in an amount of 5% by weight of the fish dissolving paste to remove the fish dissolving paste itself Odor and residual chlorine.

(3) Preparation of fish viscera enzyme extract: take the fish offal after processing, wash it, crush it in 0℃ environment, add 0.5% KCl aqueous solution with mass percentage concentration pre-cooled to room temperature, ultrasonically disperse for 20 minutes, homogenize The slurry was centrifuged at 3000r/min for 10 minutes, and the supernatant was filtered to obtain fish visceral enzyme extract.

(4) Enzymatic hydrolysis treatment: add the prepared fish offal enzyme extract to the sterilized and deodorized fish lye, the amount of the enzyme extract is 5% of the mass of the fish lye, the fish after adding the enzyme extract The solution was digested in a sterile environment at 30°C and a pH of 6.5 for 5 hours. After the digestion was completed, the resulting enzymolysis solution was deactivated at 90°C for 5 minutes, and 15°C/min was used during the deactivation process Rapid heating rate.

(5) Drying and crushing: freeze-drying the fish paste processed in step (4) and then crushing it to make protein fertilizer, in which the freezing temperature during freezing and drying process is -30℃, the vacuum degree is 50Pa, and the heating temperature is 60℃, Drying time 5h.

Off fishy [4]

(1) Fish paste sterilization: put the fish paste in a UV environment for sterilization for 30 minutes;

(2) Preparation of photocatalytic deodorant: The preparation of the photocatalytic deodorant includes the following steps:

(1) Raw material preparation for deodorizing agent: deodorizing agent is prepared according to the following mass percentage: nano-scale rutile titanium dioxide powder 20%, chabazite powder 80%;

(2) Preparation of deodorizing agent: after mixing the deodorizing agent raw materials, add water twice the mass of the raw material powder, after stirring, ultrasonically disperse for 40 minutes, after the dispersion is completed, the mixture is dried and pulverized, and the resulting mixed powder is over 100 Mesh screen

(3) Photocatalytic deodorization: Weigh the deodorization agent according to the mass ratio of deodorization agent to fish dissolving slurry is 1:10, put the deodorization agent into the filter bag according to the specifications of 1 to 5 grams per bag, and filter the mesh bag The pore size of 0.2mm, put the filter bag with deodorant into the fish solution slurry and stir for 1 hour under the light of high-pressure mercury lamp light source;

(4) Separation of deodorant: remove the filter bag containing deodorant to obtain deodorized fish dissolving slurry.